Dental Implants: Restoring Teeth, Brightening up Smiles – III

Reading Time: 6 minutes

By replacing missing tooth roots, dental implants provide people with the strength and stability required to eat all the foods they love, without struggling to chew. Additionally, they help to stimulate and maintain jawbone, preventing bone loss and to support facial features, says Shameena, in the third and final part of her three-part research article, in the weekly column, exclusively in Different Truths.

Dental implants are artificial tooth roots used to support a for a missing tooth or teeth, helping to stop or prevent jaw bone loss. The implantation procedure is categorised as a form of prosthetic (artificial replacement) dentistry but also is considered a form of cosmetic dentistry.

People who have lost teeth might feel too self-conscious to smile or talk. Additionally, biting irregularities caused by tooth loss can have a negative effect on eating habits, leading to secondary health problems like malnutrition.

By replacing missing tooth roots, dental implants provide people with the strength and stability required to eat all the foods they love, without struggling to chew. Additionally, they help to stimulate and maintain jawbone, preventing bone loss and helping to support facial features.

Tooth Loss

Teeth are lost because of:

  • Tooth decay
  • Root canal failure
  • Gum disease (Periodontitis)
  • Trauma to the mouth (tooth injury)
  • Excessive wear and tear
  • Congenital defects

Procedure

To determine if implants are right for you, a consultation with your dentist, oral surgeon, and/or periodontist or prosthodontist is needed. During this appointment, your dental professional will thoroughly examine your teeth and gums and evaluate bone density and quantity. This may involve X-rays and computed tomography scans (CT scans) to ensure there is sufficient bone structure for placing the implant(s) and to determine exactly where they should be placed.

Based on the condition of your oral tissues, oral hygiene and personal habits, and commitment to follow aftercare instructions, your dentist will advise you of the most appropriate plan. Some patients with insufficient bone or gum tissue require bone or soft tissue grafts and/or the use of small diameter implants (also called mini implants).

Depending on your situation, your dental professional will advise you of how long the entire treatment process will take, how many appointments will be necessary and what you can expect after each procedure. During the consultation, options for local anesthesia (to numb the affected and surrounding areas) and sedation dentistry, if necessary, also will be discussed. The estimated cost of your dental implants will also be discussed during this meeting. Costs can vary significantly based on the type of treatment you opt for (amongst other things).

Any underlying oral health issues must first be managed before implantation may be considered. Common issues such as tooth decay and gum disease can make treatment less effective.

If you are a smoker, your dentist will advise you to quit, as smokers face a greater risk of failure than non-smokers. Smoking can affect Osseointegration, the process by which a dental implant anchors to the jawbone.

Once your dentist deems your mouth enough for treatment, your custom treatment can begin.

The Procedure

Today’s dental implant restorations are virtually indistinguishable from other teeth. This appearance is aided in part by the structural and functional connection between the implant and the living bone. The procedure is typically performed in a single sitting but requires a period of Osseointegration.

Osseointegration is the process by which the implant anchors to the jawbone. An Osseointegrated implant takes anywhere from three to six months to anchor and heal, at which point your dentist can complete the procedure by placing a crown restoration. If Osseointegration does not occur, the implant will fail.

Dental implantation, which is performed to replace missing teeth, can be done anytime after adolescence or when bone growth is complete. Certain medical conditions, such as active diabetes, cancer or periodontal disease, may require additional treatment before the procedure can be performed.

Preparing the Jaw for Implantation: A dental implant restoration is commonly composed of a titanium material screw and a crown. A small-diameter hole (pilot hole) is drilled at edentulous (where there is no tooth) jaw sites in order to guide the titanium screw that holds an implant in place. To avoid damaging vital jaw and face like the inferior alveolar nerve in the mandible (lower jaw), a dentist must use great skill and expertise when boring the pilot hole and size the jawbone. In many instances, dentists use surgical guides created based on the CT scans when placing the implants.

Placement: After the initial pilot hole has been drilled into the appropriate jaw site, it is slowly widened to allow placement of the implant screw. Once in place, surrounding gum tissue is secured over the implant and a protective cover screw is placed on top to allow the site to heal and Osseointegration to occur. After up to six months of healing, your dentist will uncover the implant and attach an abutment (which holds the crown or tooth-like replacement). In some cases, the abutment may be attached during the initial procedure. When the abutment is in place, your dentist then will create a temporary crown. The temporary crown serves as a around which the gum grows and shapes itself in a natural way. The process is completed when the temporary crown is replaced with a permanent crown.

Recovery, Follow-up & Aftercare

Dental implant recovery depends on a number of factors, one of which includes the various procedures required to complete your treatment. However, it is generally recognised that once an implant has been placed, maintaining diligent oral hygiene habits is required to ensure proper fusing with bone structure. Failure to floss and brush is a leading cause of failure, and infection can occur if the implant and surrounding areas are not cleaned properly. Smoking also is attributed to high failure rates and should be avoided following implant procedures.

If provisional restorations were placed along with the implant(s), it will be important to clean them as you would your natural teeth to ensure the best possible healing and fusing.

After the initial surgical procedure, should be minimal. Swelling of your gums and face may occur, as well as minor bleeding and bruising of the implant site. Prescription pain medications may be prescribed by your dentist to relieve any pain or you feel after the procedure. For five to seven days after surgery, your diet should be restricted to soft foods. If stitches are present, they may need to be removed by your dentist; however, self-dissolving stitches that do not require removal are typically used.

Healing from the surgical procedure to place the implant(s) takes up to six months, while the fitting and seating of the crown(s) can take up to two months. Again, this timeframe depends on individual cases and treatments. Follow-up appointments with your treatment coordinators are essential for monitoring your progress.

If cared for properly, it can remain in place for more than 40 years.

Types of Dental Implants

More than 60 companies’ manufacturer dental implants and/or the used to create the restorations placed on top of them. As a result, dentists have many options for identifying the right treatment for specific patient needs. However, be aware that if you undergo an implant procedure by one dentist, then see a different dentist for a repair, your new dentist may have limited experience with, or may not have access to, the material components used by the previous dentist.

Dental implants usually are categorised based on the type of procedure used to place them: two-stage or single stage.

Two-Stage Implants: A two-stage procedure involves surgery to place the implant into the jawbone and close (stitch) the gum tissue. Several months after healing, a minor surgery is performed to attach an abutment and temporary restoration.

Endosteal (Endosseous) Implants: Placed in the jawbone, endosteals are the most commonly used type for two-stage implant procedures. Placed primarily as an alternative to a bridge or removable denture, endosteal implants include screw types (threaded), cylinder types (smooth) or bladed types.

Single-Stage Dental Implants: A single-stage procedure involves surgically placing a longer implant into the jaw so it is on the jawbone, with the top level with the gum tissue, after which the gum tissue is closed (stitched), leaving the implant head visible. As a result, after several months of healing, the abutment and temporary restoration can be attached without the need for minor surgery to expose the head.

Subperiosteal Implants: Placed on the jawbone within the gum tissue, with the metal implant post exposed to hold the restoration, subperiosteals are the most commonly used type for single-stage dental implant procedures. Subperiosteals are primarily used to hold dentures in place in patients with insufficient bone height.

Coatings

Although most dental implants are made of titanium, the surface — which affects the long-term integration and stability of treatment — can vary. A porous surface contributes to more bone contact than a machined titanium surface. Other surfaces include a grit-blasted or acid-etched and roughened surface, a micro-grooved or plasma-sprayed titanium surface, and a plasma-sprayed hydroxyapatite coating.

Connectors

Implants also may be categorised based on the shape/type of their head. All implants require the restoration and abutment to be attached or screwed to the head. For this purpose, there are three main connector types:

Internal Hex Connectors: Shaped like a hexagon, an internal hex connector is an opening in the implant head into which the restoration/abutment is screwed.

External Hex Connectors: Also shaped like a hexagon, these connectors are atop the implant head.

Internal Octagon Connectors: Shaped like an octagon, an internal octagon connector has an opening in the implant head into which the restoration/abutment is screwed.

Implant Sizes

Another way to categorise implants is based on their size (also called platform), which dictates where they generally can be placed in the mouth. However, every case is different, and individual spacing and bone availability needs may dictate the use of a different size.

Standard Platform: Standard dental implants range in size from 3.5 mm to 4.2 mm in diameter. These comparatively shorter and narrower implants are most commonly placed toward the front of the mouth.

Wide Platform: Wide platform dental implants range in size from 4.5 mm to 6 mm in diameter and are placed primarily in the back of the mouth.

Mini or Narrow Body: Mini or narrow body dental implants range in size from 2 mm to 3.5 mm in diameter and are placed primarily in patients with insufficient space between their tooth roots to accommodate a larger size. They also may be placed when the patient has insufficient bone density.

(Concluded)

©Shameena Abdurahiman

Photos sourced by the author from the Internet

#ToothImplants #TreatmentForToothLoss #WhatAreToothImplants #FashionFunda #DentalHealth #DifferentTruths

Shameena Abdurahiman

Shameena Abdurahiman

Shameena is a Self-made independent entrepreneur, Fashion Designer and Stylist, Artist,Photographer, Fitness freak, Poet, Blogger, Graphic Designer, Life strategist and many other things. Her collections cater to a broad range of women, from classic to modern, fusion and embrace all attitudes from romantic to dramatic. She is currently situated in Kuala Lumpur, Malaysia.
Shameena Abdurahiman
Share